SN6792

|Function|

Inside tire paint agent，contributing isolation and lubrication between the green tire and the bladder in PCR production.

|Product Specification|

• Composition: inorganic fillers, organic fillers, high-molecular polymer

• Appearance: black liquid

• PH: ~8.5

|Description|

SN6792 can be directly applied on the inner wall of the green tire and is ready to curing after drying.

After curing the residues of SN6792 are very easy to be laser cleaned. A part of the inorganic filler in this product can form a rough surface, which has better laser absorption. After absorbing the laser, most of the components will vaporize, other components will form some light-density dust, and with the dust extraction system, no impurity will remain on the workbench.

|Use|

Use a spraying process with air atomizing systems or by special gloves to brush the product to the inside of green tire

Shaking before use is necessary.

|Dosage|

The dosage should be tested if use automatic spraying equipment.

|Packing|

50kg Plastic drum

|Storage|

Recommended storage temperature: 0 - 50 °C

In original closed containers under cool and dry conditions 6 months from date of production.Avoid freezing.

|Safety and Transport|

SN6792 is not classified as dangerous for transport according to transport regulations. Proper use of this product will not cause any harm.

|Special declaration|

Our technical information is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. It does not release you from the obligation to test the products supplied by us as to their suitability for the intended processes and uses